Official

E - 鉄道旅行 / Railway Trip Editorial by admin Editorial for printing

gpt-6-astra-medium

Overview

We want to find the route from City \(1\) to City \(N\) with the minimum total travel time such that the total fare does not exceed the budget.
This problem can be solved using dynamic programming, where the state maintains the “spent fare so far” in addition to the “current city”.

Analysis

1. Converting the Budget to a Per-Person Basis

Since the two people always take the same trains, the total fare paid is exactly twice the sum of the fares for one person.

Therefore, let the budget for one person be \(C=\lfloor K/2\rfloor\). From here on, it suffices to consider routes where the sum of fares—with local train fares as \(A_i\) and express train fares as \(B_i\)—is at most \(C\).

For example, if \(K=9\) yen, the total fare per person can be at most \(4\) yen. Given the constraint \(C\leq 500\), we can maintain the total fare spent so far as part of the DP state.

2. Shortest Time per City Alone Is Insufficient

Recording only the shortest travel time to each city, as in standard shortest path problems, is insufficient.

For example, consider two ways to reach a certain city:

  • A route with a short travel time that consumes almost all of the budget.
  • A route with a longer travel time that saves fare.

In such a case, choosing the latter might be necessary to have enough budget remaining to reach the final destination.

On the other hand, enumerating all possible paths and train choices leads to an enormous number of candidates. Therefore, we only keep the minimum travel time among all ways to reach the same city with the same spent fare. Any other way is redundant because the remaining budget and the available future transitions are identical, meaning they cannot lead to an improved answer.

3. Utilizing Strictly Increasing Fares

All train fares are at least \(1\). Therefore, each time a train is taken, the spent fare strictly increases.

Although the original railway network contains cycles, if we represent each state as a pair of (city, spent fare), transitions always lead to a state with a strictly larger spent fare. Hence, we can compute the DP in ascending order of spent fare.

Furthermore, there is no guarantee regarding the relative order of fares or travel times between local trains and express trains. We should not make assumptions based on their names and instead treat each as an independent mode of travel.

Algorithm

1. Build the Graph

For each railway line, add the following two types of edges bidirectionally:

  • An edge with fare \(A_i\) and travel time \(S_i\)
  • An edge with fare \(B_i\) and travel time \(T_i\)

Edges with a fare exceeding \(C\) exceed the budget in a single ride, so there is no need to add them.

2. Define the DP Table

Let \(dp[c][v]\) be:

The minimum travel time required to reach City \(v\) having spent exactly \(c\) yen per person in fares.

Initialize the base case with \(dp[0][1]=0\), and set all other states to \(\infty\) (representing unreachable).

3. Transitions in Ascending Order of Spent Fare

In the order of \(c=0,1,\ldots,C\), examine transitions from each city \(u\).

Suppose we can travel from City \(u\) to City \(v\) with fare \(f\) and travel time \(t\). If \(c+f\leq C\), update as follows:

\(dp[c+f][v]\leftarrow\min\bigl(dp[c+f][v],\ dp[c][u]+t\bigr)\)

Since \(f\geq 1\), the destination of the update is always a fare level that will be processed later.

4. Find the Answer

Since it is not necessary to spend the entire budget, the answer is \(\min_{0\leq c\leq C}dp[c][N]\). If all of these states are unreachable, output -1.

In the code, answer is updated while processing each fare level. Furthermore, if the current travel time is already greater than or equal to answer, transitions from that state can be skipped (pruned). Because any transition only increases the travel time, it is impossible to improve upon the current best answer from such a state.

Why This Approach Is Correct

After reaching the same city with the same spent fare, the set of available future moves is identical. Thus, keeping only the minimum travel time does not discard any optimal solution.

Moreover, any state that transitions directly into a state with fare \(c\) must have had a spent fare strictly less than \(c\). By processing states in ascending order of fare, all necessary transitions are fully accounted for before moving on to larger fares.

Therefore, this DP correctly computes the minimum travel time within the budget. The pruning in the code only skips states that cannot possibly improve the current answer, so it does not affect the correctness of the final result.

Complexity

Let \(C=\lfloor K/2\rfloor\).

For each fare level, we check \(N\) cities and examine \(O(M)\) edges in total.

  • Time Complexity: \(O((C+1)(N+M))\)
  • Space Complexity: \(O((C+1)N+M)\)

Writing \(C+1\) accounts for the case where \(K=0\).

Implementation Notes

  • 0-based Indexing of City Numbers
    Since 0-based indexing is used for city numbers in the code, the initial state is dp[0][0] = 0 and the destination is n - 1.

  • Track Fares as “Exact Amount Spent”
    The answer is not just dp[budget][target], but the minimum over all fares up to the budget.

  • Add Edges Bidirectionally
    Register bidirectional edges for both local and express trains. Multi-edges can be handled as-is.

  • Use a Sufficiently Large Value for Infinity
    The total travel time may exceed the range of a 32-bit integer. Python handles arbitrarily large integers naturally, and 10**30 is used in the code to represent unreachable states.

  • No Special Handling Needed for Budget 0
    Since all fares are positive, no moves can be made, and the implementation naturally outputs -1.

    Source Code

import sys


def main():
    input = sys.stdin.buffer.readline
    n, m, k = map(int, input().split())
    budget = k // 2

    graph = [[] for _ in range(n)]
    for _ in range(m):
        u, v, a, b, s, t = map(int, input().split())
        u -= 1
        v -= 1
        if a <= budget:
            graph[u].append((v, a, s))
            graph[v].append((u, a, s))
        if b <= budget:
            graph[u].append((v, b, t))
            graph[v].append((u, b, t))

    inf = 10**30
    dp = [[inf] * n for _ in range(budget + 1)]
    dp[0][0] = 0
    answer = inf
    target = n - 1

    for cost in range(budget + 1):
        row = dp[cost]
        if row[target] < answer:
            answer = row[target]

        for u, current_time in enumerate(row):
            if current_time >= answer:
                continue
            for v, fare, travel_time in graph[u]:
                next_cost = cost + fare
                if next_cost <= budget:
                    next_time = current_time + travel_time
                    next_row = dp[next_cost]
                    if next_time < next_row[v]:
                        next_row[v] = next_time

    print(answer if answer < inf else -1)


if __name__ == "__main__":
    main()

This editorial was generated by gpt-6-astra-medium.

posted:
last update: