Official

E - 配達員の巡回 / Delivery Person's Round Editorial by admin Editorial for printing

Gemini 3.0 Flash (Thinking)

Overview

This problem asks us to find the shortest route that starts from point 1, visits all \(K\) specified points, and returns to point 1. While the number of points \(N\) and the number of roads \(M\) can be large, a key characteristic is that the number of points to visit \(K\) is very small, at most 15.

Analysis

1. Organizing the Necessary Information

Although there are \(N\) points, we are only particularly interested in a total of \(K+1\) points: “point 1” and “the \(K\) delivery destinations.” When moving from point \(A\) to point \(B\), if the intermediate points along the way are not delivery destinations, we simply need to traverse the shortest path through them.

Therefore, this problem can be decomposed into the following 2 steps: 1. Compute the shortest distances between all pairs among point 1 and \(V_1, \dots, V_K\). 2. Using the computed distances, solve the so-called Traveling Salesman Problem (TSP).

2. Why a Naive Approach Doesn’t Work

If we try to brute-force all possible visitation orders, there are \(K!\) combinations. When \(K=15\), \(15! \approx 1.3 \times 10^{12}\), which cannot be computed within the time limit. Instead, by using dynamic programming (DP), we can reduce the complexity to approximately \(O(2^K \cdot K^2)\). Since \(2^{15} \cdot 15^2 \approx 7.3 \times 10^6\), this is sufficiently fast.

Algorithm

Step 1: Computing Shortest Distances Between All Pairs

We run Dijkstra’s algorithm starting from point 1 and each delivery destination \(V_i\) (a total of \(K+1\) sources). - A single run of Dijkstra’s algorithm computes the shortest distances from a given source to all other points. - By repeating this \(K+1\) times, we construct a \((K+1) \times (K+1)\) distance matrix dist_matrix that covers all distances between the points of interest.

Step 2: Traveling Salesman Problem via Bitmask DP

We represent the set of “which points have been visited” as a bitmask (an integer value) and perform the following DP.

  • DP State Definition: dp[mask][i] := the minimum cost when the set of already visited delivery destinations is mask and the current location is delivery destination \(V_i\) (Note: mask is a \(K\)-bit integer where the \(j\)-th bit being 1 indicates that \(V_j\) has been visited)

  • Initial State: We set the cost of going directly from point 1 to each delivery destination \(V_i\). dp[1 << i][i] = dist_matrix[0][i+1] (0 corresponds to point 1, i+1 corresponds to \(V_i\))

  • Transition: From the current state dp[mask][i], when moving to a not-yet-visited delivery destination \(V_j\): dp[mask | (1 << j)][j] = min(dp[mask | (1 << j)][j], dp[mask][i] + dist_matrix[i+1][j+1])

  • Final Answer: The answer is the minimum value of dp[(1 << K) - 1][i] plus the cost of returning from current location \(V_i\) to point 1, dist_matrix[i+1][0], taken over all \(i\).

Complexity

  • Time Complexity: \(O(K(N + M) \log N + 2^K \cdot K^2)\)
    • Dijkstra’s algorithm run \(K+1\) times: \(O(K(N + M) \log N)\)
    • Bitmask DP part: \(O(2^K \cdot K^2)\)
  • Space Complexity: \(O(N + M + 2^K \cdot K)\)
    • Memory needed for the graph’s adjacency list, Dijkstra’s distance arrays, and the DP table.

Implementation Notes

  • Optimizing Dijkstra’s Algorithm: When running Dijkstra’s algorithm, you can reduce execution time by terminating the search early (using break) once the distances to all \(K+1\) points of interest have been finalized from the current source.

  • Fast I/O: Since \(N\) and \(M\) can be large, in Python it is effective to read all input at once using methods like sys.stdin.read().split().

  • Bit Operations: You need to correctly perform bit operations such as checking if a point has been visited with mask & (1 << j) and setting the visited flag with mask | (1 << j).

    Source Code

import heapq
import sys

def solve():
    # Use fast I/O to read all input at once
    input_data = sys.stdin.read().split()
    if not input_data:
        return
    
    # N: number of locations, M: number of roads, K: number of destinations
    N = int(input_data[0])
    M = int(input_data[1])
    K = int(input_data[2])
    
    # V: list of destination locations
    V = [int(x) for x in input_data[3:3+K]]
    
    # Build adjacency list for the graph
    adj = [[] for _ in range(N + 1)]
    idx = 3 + K
    for _ in range(M):
        u = int(input_data[idx])
        v = int(input_data[idx+1])
        w = int(input_data[idx+2])
        adj[u].append((v, w))
        adj[v].append((u, w))
        idx += 3
        
    # The locations we are interested in: starting point (1) and all destinations (V)
    nodes = [1] + V
    num_nodes = K + 1
    
    # Precompute shortest paths between all pairs of interest using Dijkstra
    # We run Dijkstra from each of the K+1 nodes.
    dist_matrix = [[0] * num_nodes for _ in range(num_nodes)]
    is_target = [False] * (N + 1)
    for node in nodes:
        is_target[node] = True
        
    for i in range(num_nodes):
        start_node = nodes[i]
        dists = [float('inf')] * (N + 1)
        dists[start_node] = 0
        pq = [(0, start_node)]
        
        count = 0
        visited_targets = [False] * (N + 1)
        
        while pq:
            d, u = heapq.heappop(pq)
            if d > dists[u]:
                continue
            
            # If we popped a node of interest, record it.
            # Once we've popped all interest nodes, we can stop Dijkstra for this start_node.
            if is_target[u] and not visited_targets[u]:
                visited_targets[u] = True
                count += 1
                if count == num_nodes:
                    break
            
            for v, w in adj[u]:
                new_d = d + w
                if dists[v] > new_d:
                    dists[v] = new_d
                    heapq.heappush(pq, (new_d, v))
        
        # Fill the distance matrix for the interest nodes
        for j in range(num_nodes):
            dist_matrix[i][j] = dists[nodes[j]]
            
    # TSP using Bitmask DP
    # dp[mask][i] is the minimum distance to visit the set of destinations in 'mask',
    # ending at destination V[i].
    # 'mask' is a bitmask of length K where the j-th bit represents destination V[j].
    INF = float('inf')
    dp = [[INF] * K for _ in range(1 << K)]
    
    # Initial step: move from location 1 (nodes[0]) to each destination V[i] (nodes[i+1])
    for i in range(K):
        dp[1 << i][i] = dist_matrix[0][i+1]
        
    # Iterate through all masks (sets of visited destinations)
    for mask in range(1, 1 << K):
        dp_mask = dp[mask]
        for i in range(K):
            d_curr = dp_mask[i]
            if d_curr == INF:
                continue
            
            # Try moving from the current destination V[i] to a next destination V[j]
            dist_row = dist_matrix[i+1]
            for j in range(K):
                if not (mask & (1 << j)):
                    new_mask = mask | (1 << j)
                    new_dist = d_curr + dist_row[j+1]
                    if dp[new_mask][j] > new_dist:
                        dp[new_mask][j] = new_dist
                        
    # Final step: from the last visited destination back to location 1
    ans = INF
    full_mask = (1 << K) - 1
    dist_from_start = dist_matrix[0] # dist_matrix is symmetric, dist_matrix[0][i+1] == dist_matrix[i+1][0]
    dp_full = dp[full_mask]
    for i in range(K):
        # Total cycle: 1 -> ... -> V[i] -> 1
        res = dp_full[i] + dist_from_start[i+1]
        if res < ans:
            ans = res
            
    print(ans)

if __name__ == '__main__':
    solve()

This editorial was generated by gemini-3-flash-thinking.

posted:
last update: